shopping cart
0 Items
Product
Qty
Total Price
* If you have changed the quantity of any of your items,
please make sure to update the cart before checking out.
Total: $
M-POWER MK2 Fasttrack Sharpening System + Enlarge Image
M-POWER MK2 Fasttrack Sharpening System - Close-up      

M-POWER MK2 Fasttrack Sharpening System

Item #: 66654
Includes Free Shipping
Out of Stock

The M-Power FastTrack MK2 Sharpening System is a vastly improved version of M-Power's original system. It is a unique solution that holds the blade to be sharpened stationary, and its angle constant, while a long lasting diamond stone is guided across the cutting edge (at a 90° angle to the tool's normal cutting direction) at either 25°, 27.5°, 30° or 32.5° (depending on your application). This action makes the bevel flat and the edge true, lasting, and requiring only minimal maintenance unless chipped or nicked.

The re-designed solid aluminium diamond stone holding carriage doubles the number of sharpening angles of the original. This in turn doubles the life of your chisels and plane blades by allowing over 20 chisel re-sharpens between primary re-grinds. The angles are coded 1,2,3 and 4 making it simple to move from one sharpening angle to the next.

The most important development in the carriage design is the "Center It Clip" that positions blades in the middle of the tool bed. This not only reduces the pressure needed to hold the chisel during sharpening; but it also prevents the carriage coming off the end of the base. Last, and certainly not least, it increases the length of the sharpening stroke, making the sharpening process quicker.

Once the sharpening process is complete, use the onboard de-burring plate (also great for lapping the back of the blade) and a honing strop to remove wire burrs and get down to that final razor edge.

The updated carriage design is much more comfortable to use due to the curved ergonomic handle ends which more naturally fit the hand. This is especially noticeable after an "all chisels" honing session when you could be using the FastTrack for as much as 30 minutes.

Other features include quick change magnetic lock diamond stones, nylon carriage glides, and non-slip feet. System accepts a range of chisels and plane blades from 1/8 inch to 2-1/2 Inches wide. Imported

Standard Set Includes: the DC FastTrack MK2; one each 220 Grit Preparation and 450 Grit Finishing Diamond Stones; a Center It Clip; a Grip Mat; Cleaning Block; Mounting Screw; and an Instruction Booklet.



This product has not yet been reviewed.
Click here  to write your own review.
Related Products