shopping cart
0 Items
Product
Qty
Total Price
* If you have changed the quantity of any of your items,
please make sure to update the cart before checking out.
Total: $
M-POWER PSS1 DIAMOND CROSS DE-BURRING PLATE + Enlarge Image

M-POWER PSS1 DIAMOND CROSS DE-BURRING PLATE

Item #: 30329
Includes Free Shipping

Regardless of what system a woodworker chooses to sharpen or re-touch the edge of a blade with, a result of the process is going to be raising a burr or wire on the back or flat of the chisel. The successful removal or "Backing Off" of the wire is an important part of the sharpening process.

The burr is actually the abraded tip or old edge of the chisel that's being removed. When sharpening on the PSS the burr removal was carried out by hand; wiping the flat of the blade on one of the PSS diamond stones. However this can now be achieved much more quickly by fitting the PSS accessory "De-Burring plate".

After sharpening simply sliding the blade back away from the carriage and across the De-Burring plate and the wire/burr is wiped clean from the blade. Fitting the De-Burring plate has an added bonus; due to the naturally abrasive surface of the diamond plate. Holding any chisel or plane blade during the sharpening process becomes easier as the diamond plated surface tends to grip and hold the blade in position better.

Specifications: The graded 1200 grit / 9 Micron diamond is embedded in a nickel plating on steel substrate. The plate is fixed to the blade receiving recess with 3M's oil resistant self adhesive backing. England



This product has not yet been reviewed.
Click here  to write your own review.
Related Products