Whiteside A250 Slotting Cutter Arbor w/out Bearing, 1/4" SH

Write your own review


Product Description

The Whiteside A250 Slotting Cutter Arbor with out Bearing is for use with any of Whiteside's 3-wing carbide tipped slotting cutters. The cutters are used for running slots for panels, splines, and t-moldings, and for cutting tongue and groove joints. The Arbor is sold without the standard #RB5 bearing but does come with 2 spacer washers and lock nut. Arbor has a shaft length of 1-3/16" and an arbor diameter of 5/16". Different cutting depths can be achieved automatically by adding bearings of different sizes (Sold separately. Listed below):

#RB5 bearing. The standard bearing for this arbor - 1/2" depth of cut
#RB20 - 9/16" depth of cut
#RB25 - 3/8" depth of cut
#RB26 - 1/4" depth of cut
#RB27 - 5/8" depth of cut

Cutters and arbors sold separately. Whiteside Machine Company - Claremont, North Carolina.

Arbor Specifications
SH = Shank Size. OAL = Overall Length.

1/4" SH X 2-5/8" OAL

Product Specs

Sku: RA250