IVAC SWITCH BOX

This single box switching & outlet system turns on a shop vacuum or small dust collector automatically when your tool is turned on. It can be used with tools ranging from a high powered table saw to a low power sander - virtually any power tool that generates dust.

The iVac Switch Box avoids delays and distractions, by automatically controlling the dust collection system, which in turn reduces airborne dust in the work area.

- Designed for Continuous Operation.
- Compact and lightweight and can be wall mounted.
- Extends the life of your vacuum system.
- Three Modes of Operation - Auto – Off – On
- Turn On Delay - Avoids two power surges (Tool and vac) occurring at the same time
- Turn Off Delay - 6 second delay ensures that your work area continues to be cleared of remaining airborne debris even after the tool has stopped.
- Two Input Power Cords - Permit operation from two separately protected AC mains circuits, when the combined power from the tool and the vacuum exceed 15 Amps.
- Power Cord Protection - Both power cords are individually protected with 15 Amp circuit breakers.

Specifications
- Box is designed to operate from one or two 15 Amp AC mains circuits.
- The maximum AC current to the tool should not exceed 12 Amps.
- Turn On Delay (In Auto Mode.) 0.5 seconds to 2.0 seconds.
- Turn Off Delay (In Auto Mode.) Approximately 6.0 seconds.
- Turn On Tool Current in Auto Mode. 0.3 Amps to 12 Amps.

Our most popular unit for small shops. Imported