KREG POCKET SCREWS - 3/4", #6 FINE, PAN-HEAD, 100CT

Kreg brand screws with Pan Heads and fine threads. This particular size is best suited for thin stock and is the recommended screw for use with Kreg's Micro Drill Jig (#77753).

These self-tapping type screws have augur points that help eliminate the need for pre-drilling. Screws are are zinc plated, case hardened, and dri-lubed for strength and easy driving.

Flat heads help the screw to seat flush in the bottom of the hole. Deep #2 square drive recesses increase driving power and provide positive engagement to reduce cam-out. Imported

Choosing the Right Pocket Hole Screw:
1) Select the Right Screw Length - As a general rule use the following screw lengths when joining equal material thicknesses (ex. 3/4 to 3/4" material):
    1/2" Stock - 1" Screw
    5/8" Stock - 1" Screw
    3/4" Stock - 1-1/4" Screw
    7/8" Stock - 1-1/2" Screw
    1" Stock - 1-1/2" Screw
    1-1/8" Stock - 1-1/2" Screw
    1-1/4" Stock - 2" Screw
    1-3/8" Stock - 2" Screw
    1-1/2" Stock - 2-1/2" Screw

2) Select the Correct Thread Type - Fine thread - Preferred in hardwoods. Help eliminate splitting. Coarse thread - Preferred in soft material for better holding power. Hi-Lo Thread - 2 sets of threads (one set higher than the other) for medium hardwoods like poplar.

3) Choose A Head Style - The Maxi-Loc - SML - Washer head (WH) screw. Provides large bearing surface for secure seating securely and constant clamping force. Pan head - SPS (PH) - Smaller head size suited for going below flush when joining 1/2" material.