Festool T 15+3 Li-Ion Drill Package

Festool T 15+3 Li-Ion Drill - This "5-In-1" Drill is powerful, versatile, and comfortable to use

With the T+3 cordless drills, Festool goes Lithium Ion, and thanks to their innovative and incredibly versatile FastFix chuck system, the T+3’s can do the work of five drills in one:

1) Eccentric Chuck - Perfect for corners and against adjoining edges
2) Keyless Drill Chuck -  Can be used with drill and driver bits up to 1/2” in diameter
3) Centrotec Chuck - With its full array of interchangable drill and driver bits the Centrotec is lighter weight and has a more compact footprint.
4) Right-Angle Chuck - Provides a 90° angle to the drive motor for tight spaces. The Eccentric and Right-Angle Chucks can both swivel a full 360 degrees with 16 locking positions.
5) Optional Depth Stop Chuck - Provides consistent, precise depth settings regardless of workpiece material.

If that’s still not enough, you can also use standard hex driver bits in the drill with no chuck attached. The T+3 cordless drill set includes all chucks except the depth stop chuck.

Why Choose A T + 3 Drill ?
Intelligent Lithium Ion Batteries - T+3’s utilize some of the most sophisticated Lithium Ion technology available.  The batteries are cell balanced, meaning that battery cells are selected and matched to offer optimal charge and discharge cycles. The T+3 batteries can achieve full charge in under 70 minutes. Best yet, the batteries, charger and drill are all backed by a 3 Year Warranty.

Second Generation Brushless Motor - T+3 cordless drills feature a second generation brushless motor. Brushless motors offer many advantages over the brushed DC motors in all other cordless drills, including higher efficiency, better reliability, and longer service life.

Electronically Controlled Clutch - Nearly all drills employ a mechanical clutch. The T+3 uses a superior, more sophisticated electronic clutch. The conveniently placed clutch dial controls the electronic clutch setting. This results in less wear on the motor and other wearable parts. When the clutch engages, the T+3 notifies you with an audible tone. When the clutch dialed to a setting below 10, the speed of the drill is also reduced automatically.

Dual Motor Speed Selector - The T+3 offers two speed settings, which can be selected by the conveniently placed selector on the top of the drill. Changing the speed setting does not change the torque produced by the motor, which is electronically controlled. Use the speed selector in conjunction with the clutch setting to drill with full power or to drive delicate soft metal screws without damage.

Drill/Drive Mode Selector - Like all controls of the T+3, the drive/drill mode selector is conveniently located. When in drill mode, the drill automatically overrides the clutch to make sure you get maximum power and torque. When in drive mode, the clutch re-engages. Switch between drill and drive modes without losing your clutch setting.

Weight & Comfort - If you use your cordless drill for extended periods of time, making it comfortable to use is a primary concern. The soft, rubberized grip reduces fatigue and the drill is designed to be well balanced. The use of Lithium Ion batteries significantly lowers the weight of the drill.

Forward / Reverse Selector - Use the forward / reverse selector to switch motor direction. Quickly switch between driving and removing screws.

Ventilation Ports - Strategically placed ventilation ports reduce the chances of premature wear due to overheating. Additionally, Festool’s patented MMC electronics, monitor and protect the drill from damage and overheating.

Magnetic Bit Stowage - Always have quick access to your most commonly used driver bits by stowing them on the drill. The magnetic bit stowage can accomodate up to four 1” driver bits.

Each Standard T+3 Package Includes: T+3 Drill; TRC 3 Charger; Two (2) Lithium Ion Batteries; FastFix Right Angle, Eccentric and 1/2” Drill Chucks; Centrotec Starter Set; and Systainer SYS 2 w/ Storage Compartment. Germany